RJ45 connector and M12 network cable connector can be connected!

Most of the contact springs of M12 mesh connection to RJ45 connection wire harness are made of alloy copper, which is easy to be corroded in office environment, the key building coating is gold, palladium or their composition of aluminum and tin, the use of coating will contact the spring and office environment to separate, so as to avoid copper corrosion target. Smears of precious metals, such as gold and palladium, produce a negative emotional coating that protects against plastic film from external coatings, while tin, the most common non-precious metal, has surface air oxidation problems.

Rated current and current is also must consider the timely, different applications, the prescribed current is not the same, so before purchasing must make clear that must be installed on which kind of machinery and equipment. The M12 connector will raise the temperature throughout the application, so the temperature rise should be within the required amount, if the multi-core electrical connector, then the rated voltage should be reduced. In addition, attention must be paid to the installation method and appearance of the M12 connection to the RJ45 wiring harness, because the M12 connection to the RJ45 wiring harness terminal has many features, for example, bending appearance, parallel lines appearance, these, in the case of purchase should pay attention to cable or cable diameter, some of the housing requirements, if it is applied to the control panel connector, must also give full consideration to tone and so on these levels, easy to do good-looking provisions. The selection of raw materials for contact coating not only takes into account the factors of corrosion protection, but also needs to have the role of enhancing the structural characteristics of the contact page. With enhanced contact page structure to prevent contact page surface plastic film from being bypassed or disintegrated in contact with each other, the connection characteristic impedance, which can help the electrical M12 connector to create and maintain stability to the RJ45 wiring harness, is beneficial to enhance its physical performance and electrical equipment characteristics.

You know what? The M12 connector can also be connected to the RJ45 connector,” editorially edited by Desso hardware.”. M12 network connection to the RJ45 connection wiring harness that waterproof plug, is in the water conditions can all work in normal work of power supply, data signal according to transport, widely used in outdoor supplies, large and medium-sized remote control of mechanical equipment, such as chemical enterprises, power plants, Power Supply Bureau, Telecommunications Network communication base station in the medium and high degree of automation processing plant, need to use cable cable cable waterproof connection. M12 connector to RJ45 wiring harness is the connector that can be used in humid natural environment, under certain pressure conditions will ensure the M12 connector to RJ45 wiring harness internal physical performance, electrical equipment performance normal application. The application of special chassis, smooth electrical performance, high hardness and compression resistance, high temperature resistance, anti-storm, anti-corrosion commodities; plating gold contacts, to ensure a stable connection, a conductive corrosion-resistant raw material high toughness, reasonable chemical reactions to carry out the current through it changed at different temperatures.