RJ45 with transformer what are the areas of use?

The RJ45 belt transformer is an electronic component in which a connecting wire is coupled with the appropriate component to end circuit connection and disconnection. In order to ensure that the normal work of the collection connector, the RJ45 connector in the positive application cycle stop safety inspection is very important, the following is the RJ45 transformer inspection process should be the idea of things:

(1) the inspection of RJ45 with transformer must be stopped in the form of power switch closed, otherwise, the electrical components will be burnt due to short circuit. 

(2) when removing the cable connector, look carefully at the connection method of the connector. It is important to release the locking reed or press the clasp condition will collect connector apart, do not force open. When disassembling, the connector should be inserted exactly and locked in the opposite way. 

(3) when some waterproof type of conductor RJ45 with transformer is removed for testing, care should be taken to remove the seal ring to prevent damage to the seal ring, and affect the water-proof effect; when removing, the seal ring must be installed in place. Otherwise, water may get into the connector and cause a circuit defect. 

(4) when checking the RJ45 connector with the multimeter, the rod should not be pulled out too hard on the metal terminal to prevent distortion and bad touch. In the process of connector welding, because the plug-in type RJ45 connector is the end of the wave soldering technology, the Patch Type RJ45 connector is the end of the reflow soldering technology. Therefore, the patch-type RJ45 connector than the plug-in RJ45 connector needs to withstand higher temperature. Therefore, the ordinary patch-type RJ45 connector will choose low-temperature material production.